1. metal building insulation Introduction
The foil insulation with 97% reflectivity can keep out of the sun to avoid the high temperature in the building. The LANDY® insulation for metal/steel buildings, which it is consist of aluminum foil and air bubble/foam. The foil can reflect the most of sun heat and then the air bubble/foam int the second layer can block the heat transmission. This insulation for the metal buildings is double ensure for the heat insulated with reasonable price. It is a cheap insulation materials with good performance.
2.Installation instruction of the metal roof insulation
1.Place the LANDY® insulation roll over the purlins of structural roof frame
2.Nail the mesh or wooden frame on the insulation sheet and attached purlins.
3.Tape the overlap of insulation sheet and nail discontinuously
4.Cover the finish exterior roof panel.
Note: Installation instructions and illustrated drawings are recommendations only, while proper local construction methods are the responsibility of the installer
How is the heat resistance of your steel building insulation materials?
The performance temperature of insulation is below 80 degree and suitable for the metal building roof.
What tools are needed for metal roof insulation installation?
Staple gun, utility knife, nails/screws, hammer, aluminum tape, etc.
Why to choose Landy insulations?
We are a real factory designing and manufacturing insulation, with best production capability, good quality control and good services.100% QC inspection before shipment.We accept CE, AWTA & ISO Certificates.
Please feel free to contact us, we will according to your building structure and condition, recommend the most suitable material and installation plan for you. We usually reply within 24 hours after we get your inquiry.
4.Recommendation of the metal building insulation
Aluminum foil bubble Metalized bubble insulation
Aluminum foil XPE foam Metalized EPE foam insulation
5.Application of the steel building insulation