commercial insulation materials Introduction
The LANDY® insulation for commercial buildings, which is consist of aluminum foil and air bubble/foam. The foil can reflect the most of sun heat and then the air bubble/foam int the second layer can block the heat transmission. This commercial roof insulation is double ensure for the heat insulated with reasonable price. And it can be applied for different types of commercial roofs(office, shopping mart and warehouse).The insulation can work very efficiently.
commercial roof insulation materials Installation instruction
1.Place the LANDY® insulation roll over the purlins of structural roof frame
2.Nail the mesh or wooden frame on the insulation sheet and attached purlins.
3.Tape the overlap of insulation sheet and nail discontinuously
4.Cover the finish exterior roof panel.
Recommendation of the commercial insulation materials:
Aluminum foil bubble Metalized bubble
Aluminum foil XPE foam Metalized EPE foam insulation
What's the advantage of your commercial roof insulation materials ?
Our commercial building insulation material have good performance on heat-resistant, fireproof, waterproof, heavy duty, lightweight, Eco-friendly and so on.
How is the heat resistance of your commercial building insulation materials?
The performance temperature of insulation is below 80 degree and suitable for the steel building roof.
What tools are needed for warehouse roof insulation installation?
Staple gun, utility knife, nailes/screws, hammer, aluminum tape, etc.
May I know whether warehouse insulation materials are fire retardant or not?
Considering the security, the best choice of insulation warehouse better be fire retardant,
The pure aluminum foil is fire retardant,and the bubble foil and xpe foam can adding fire retardant as well ,can be extinguish within 3 seconds
What about the lead time for mass production?
Honestly,it depends on the order quantity and the items.Normally it is 10-15 days
5. commercial insulation Application